Home » Blog » What Is The Process Of Slab Leak Repair

What Is The Process Of Slab Leak Repair

slab leak repair

Slab leaks occur when a water supply breaks beneath the concrete slab on which a building rests. There is a high risk that they will cause damage to your home’s plumbing, which can be both complex and costly to fix. Slab leak detection Orange County might be rugged, but licensed plumbers can find and repair the leak.

Slab leak Orange County often, as most buildings have foundations made of concrete slabs. The residences constructed in the late 1950s and early 1960s are particularly vulnerable because slabs as thin as two inches were put on the soil without any steel reinforcing.

Settling clay and dirt can cause foundations to shift, harming underground pipes. The specialists can quickly and precisely locate the source of these underground leaks using the most cutting-edge leak-detecting technologies.

Repairing the leak on the spot or moving the water supply to a new location are possible solutions. They will advise you on what they think will work best in your house and the circumstances.

Slab Leak

A slab leak occurred when water seeped in the copper pipes laid out below your concrete slab. It’s possible that the leak is only a few drops per second, or it might be a significant split in your pipes.

You need to get the source of this leak identified and corrected immediately. Leaving a slab leak unchecked for too long will cause more issues than just a high water bill.

Why do slabs leak?

Various things can cause slab leaks, but most of the time, they are the consequence of pipe damage that occurs either during or after installation. During construction, some materials are not uncommon to sustain minor damage, but if the pipes are damaged, it could lead to plumbing issues down the line.

Leaks under a shower or bathtub or pricey flooring can be costly to repair. In this situation, PEX piping is both durable and flexible. Thus, it is recommended that the water lines be rerouted via the walls or the ceiling. There may be a need for a total repiping project if multiple water lines have been compromised.

Here are the following common reasons include:

  • The severe soil erosion and flood conditions have led to scraping water pipes.
  • Harsh chemicals can corrode copper pipes and create leaks.
  • Examples of ground movement include earthquakes and grated and filled lots.
  • The deterioration of kinked or otherwise damaged copper pipes due to inadequate installation or handling.
  • Corrosion of the copper pipe due to galvanic corrosion from contact with a different metal.
  • Wear and tear occur naturally on older copper piping.
  • Tree or bush roots that wrap around the pipe cause corrosion.

Do you suspect there is a leak in the slab?

A slab leak is one of the most persistent problems in a home and one of the most challenging to find. It’s easy to think that everything is fine if you haven’t noticed any unusual signs of water damage, such as a rise in your water bill or damp spots on the floor. A slab leak may not seem like a huge concern, but remember that the copper pipes causing the leak are buried deep within your home’s foundation.

It’s unfortunate because slab leaks can ruin a building permanently. If caught early enough, they can be fixed, saving you money on water bills and any necessary repairs to your home. However, before calling in the professionals, you need to know the basics of leak detection.

Keeping this in mind, here are a few of the early warning signs of a slab leak that you may check for:

  • Your home’s water is off, yet you can still hear running water. The sound of rushing water suggests copper pipes are leaking despite being switched off.
  • Carpets and flooring are mildewed and drenched. When a slab shows signs of cracking, it’s time to replace it.
  • Cracks on your flooring or walls indicate the leak saturated them, and cracks emerged when they dried.
  • If there are hot water pools on the floor, there is a leak in the hot water pipe.

A meter test is another reliable and effective technique for finding slab leaks. To easily track your water consumption, check your meter regularly. The test results will be more accurate if conducted while no water is being used in the structure.

The following are the points while checking the meter reading:

  • Make sure that there is no one else in the house using water.
  • Take note of the meter reading before beginning the test.
  • Allow yourself at least half an hour to read it over again. If the measurement hasn’t changed, your home has no slab leaks.
  • Repeat for all bathroom and toilet valves to prevent leaks. If the meter reading doesn’t change, you don’t require repairs; otherwise, call a professional Plumber Orange County.

Slab Leak repair process

Methods for slab leak repair Orange County are outlined below.

Identifying slab leaks

The jackhammer is used by the specialists providing the slab leak detection services in Orange County, which are well-known in this regard. They bust a hole in the plate.

After that, the flooring is taken up and thrown away, exposing the concrete below. Once the concrete has been uncovered, the dirt can be dug out to reveal the corroded copper pipes beneath.

Repair water lines

The water supply lines are often composed of copper, which oxidizes over time and must be replaced. The leak is caused because the tube is wearing out and developing holes. The leaking section must be removed and a new copper tube welded onto the existing area to ensure a proper repair.

Inspecting and fixing sewage lines

Resolving issues with sewage pipes requires the assistance of trained professionals. Why? Because of the presence of poisonous human waste in the sewer systems. These tasks are best delegated to professionals who have experience with them.

A special kind of rubber, fitted over the broken sections of the sewer pipes, is used to make the necessary repairs. Fortunately, the majority of piping for sewage systems is located outdoors, where it may be easily accessed.

As you can read in this blog, slab leak repair in Orange County requires several steps. Unlike a dripping faucet, this problem cannot be solved by simply replacing the washer.

Before proceeding, it is necessary to validate and pinpoint the precise location of any holes on the property. It is required to drill holes into the slab. The following steps in fixing a leaky pipe involve welding and identifying the best sort of pipe to use as a replacement.

Regarding slab leak detection services Orange County, not just anyone will do. Accidents and mistakes that can cause further damage must be avoided; this needs expertise and experience. You should contact professionals if you live in Orange County, California, and have a slab leak.

All-Star Plumbing is the best option for Orange County residents experiencing a slab leak because of the severity and the need for a professional plumber. They are proud of their highly trained personnel with extensive experience fixing slab leaks. They are skilled, well-equipped, and articulate while explaining the situation to the client.

Our team takes all COVID precautionary measures while working.